Circutor CVM-C11 - 6�32�- Modbus Protocol: Baud Rate; 6�33�- Modbus Protocol: Peripheral Number

6.32.- MODBUS PROTOCOL: BAUD RATE
Note: Screen visible if the Modbus protocol has been programmed, “6.31.- RS-485 COMMUNICATIONS:
PROTOCOL”.
The baud rate of Modbus communications is programmed on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 62:Configuration values: Modbus, Baud rate.
Modbus: Baud rate
Possible values
9600 bauds
19200 bauds
38400 bauds
Press key to access the next programming step.
6.33.- MODBUS PROTOCOL: PERIPHERAL NUMBER
Note: Screen visible if the Modbus protocol has been programmed, “6.31.- RS-485 COMMUNICATIONS:
PROTOCOL”.
The peripheral number is programmed on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
To enter or modify the value, press the key repeatedly, increasing the value of the flashing digit.
87
Instruction Manual
CVM-C11