Note: Programming the value 0 disables the calculation of the maximum demand.
Note: When modifying the integration period, the device restarts the calculation of the maximum
demand.
Press key to access the next programming step.
6.12.- DELETING MAXIMUM DEMAND
On this screen you select whether or not to delete the maximum demand.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 33:Configuration values: Deleting maximum demand.
Deleting maximum demand
Possible values
Yes
No
Press key to access the next programming step.
6.13.- THD CALCULATION
In this screen the calculation method of the Total Harmonic Distortion (THD) is selected. See “4.1.1.-
THD CALCULATION”.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
65
Instruction Manual
CVM-C11
To Next Page
Loading...
