Circutor CVM-C11 - 6�16�- DISPLAY SELECTION Cos Φ - PF; 6�17�- Deleting Maximum and Minimum Values

6.16.- DISPLAY SELECTION cos φ - PF
In this screen it is selected what is going to be visualized in the icon, , the Cos φ or the PF,
power factor.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 39:Configuration values: Display selection cos φ - PF.
Display selection cos φ - PF
Possible values
Cos, Displaying the cos φ.
PF, Displaying the Power Factor
Press key to access the next programming step.
6.17.- DELETING MAXIMUM AND MINIMUM VALUES
On this screen you select whether or not to delete the maximum and minimum values.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
69
Instruction Manual
CVM-C11