Circutor CVM-C11 - 7�- Configuration of Ethernet Communications; 7�1�- Protocol

7. CONFIGURATION OF ETHERNET COMMUNICATIONS
Note: Ethernet communications are available on model CVM-C11-ITF-IN-ETH-ICT2.
To enter the configuration menu you must press the keys for 3 seconds.
To exit the configuration menu, press the key for 3 seconds.
If a reset is performed before validation or no key is pressed for 30 seconds, the configuration made
is not stored in memory.
Note: In the annex “ANNEX B.- ETHERNET CONFIGURATION MENUS” you can view the configuration tree.
7.1.- PROTOCOL
On this screen the Ethernet communications protocol is selected.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 71:Configuration values: Protocol.
Protocolo
Possible values
TCP, Modbus TCP
bAC, BACnet
Press key to access the next programming step.
94
CVM-C11
Instruction Manual