When the desired value is shown on the screen, move onto the next digit by pressing the key to
modify the other values.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 63:Configuration values: Peripheral number.
Peripheral number
Minimum value 1
Maximum value 255
Press key to access the next programming step.
6.34.- MODBUS PROTOCOL: PARITY
Note: Screen visible if the Modbus protocol has been programmed, “6.31.- RS-485 COMMUNICATIONS:
PROTOCOL”.
The type of parity of Modbus communications is selected on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 64:Configuration values: Modbus, Parity.
Modbus: Parity
Possible values
no no parity
EvEn even parity.
odd odd parity.
Press key to access the next programming step.
88
CVM-C11
Instruction Manual
To Next Page
Loading...
