6. CONFIGURATION
To enter the configuration menu press the key for 3 seconds.
The home screen of the menu indicates whether the menu is locked or not:
UnLOC(unlocked): When you enter the programming menu you can view and modify the
programming.
LOC (locked): When you enter the programming you can view the programming but not modify
it. Icon ,at the top of the display, indicates the locking status.
Press key to access the first programming step.
The following screen will be displayed if the programming menu is locked, LOC:
Enter the password in this screen to modify the programming parameters.
Press key for 3 seconds to edit the password. The icon appears at the top of the screen.
To enter or modify the value, press the key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key to
modify the other values.
To validate the data, press for 3 seconds and the icon will disappear from the display.
If the password is correct the icon disappears.
If you do not enter the password or it is incorrect, you can open the programming menu but it cannot
be modified.
The programming menu is unlocked for a short period of time and it will be locked again when you
exit the device’s menu.
To permanently unlock the device, select the programming parameter “6.40.- LOCKING THE
PROGRAMMING”.
56
CVM-C11
Instruction Manual
To Next Page
Loading...
