Voltage ratio x Primary Current < 600000
Note: The ratio is the relation between the primary and the secondary.
Press key to access the next programming step.
6.2.- SECONDARY VOLTAGE
On this screen the voltage transformer secondary is programmed.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
To enter or modify the value, press the key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key to
modify the other values.
To validate the data, press for 3 seconds and the icon will disappear from the display.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Configuration values
Table 23:Configuration values: Secondary voltage.
Secondary voltage
Minimum value 1
Maximum value 999
Press key to access the next programming step.
58
CVM-C11
Instruction Manual
To Next Page
Loading...
