Circutor CVM-E3-MINI - 4�6�- DIGITAL OUTPUT (Models CVM-E3-MINI-XXX)

Table 17: Selecting the tariff in accordance with the input status.
IN1, Input 1
Tariff
Logic input Tariff selection
x T1
0 T1
1 T2
Note: In the CVM-E3-MINI-xxx-WiEth models, the tariff is selected in the settings menu.
4.6.- DIGITAL OUTPUT (Models CVM-E3-MINI-xxx)
The device has one digital output, optoisolated NPN transistors (terminals 8 and 7 on Figure 4), fully
programmable, see “6.18. PROGRAMMING ALARM : DIGITAL OUTPUT T1”.
Press the keys to access the digital output status screen, see “5.4.- DIGITAL INPUT AND OUT-
PUT STATUS SCREEN (Models CVM-E3-MINI-xxx)”.
39
Instruction Manual
CVM-E3-MINI