Circutor CVM-E3-MINI - 6�23�1�- Password

To validate the data, press for 3 seconds and the prog icon will disappear from the display.
Press the key to enter the password for locking and unlocking the programming:
6.23.1.- PASSWORD
On this screen you enter the password for locking and unlocking the programming.
Press the key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the and keys to move the edit cursor.
To validate the password, press the key if you are on the last digit or the key if you are on the
first digit.
Password value : 1234
This value may only be modified through communications. See “7.3.9.16. Password configuration.”.
85
Instruction Manual
CVM-E3-MINI