Circutor CVM-E3-MINI - 6�22�4�- Modbus Protocol: Data Bits; 6�22�5�- Modbus Protocol: Stop Bits

6.22.4.- MODBUS PROTOCOL: DATA BITS
The number of data bits of Modbus communications are programmed on this screen.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Press key to browse the options.
 Configuration values
Table 56: Configuration values: Modbus protocol: data bits.
Data bits
Possible values 7 8
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
Press key to access the next programming step.
6.22.5.- MODBUS PROTOCOL : STOP BITS
The number of Stop bits of Modbus communications are programmed on this screen.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Press key to browse the options.
 Configuration values
Table 57: Configuration values: Modbus protocol: stop bits.
Stop bits
Possible values 1 2
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
Press key to access the next programming step.
81
Instruction Manual
CVM-E3-MINI