5.5.4. ETHERNET COMMUNICATIONS: GATEWAY
You can set up (DHCP disabled) or view the gateway for Ethernet communications on this screen.
 
    
Press the key   to display the value.
Press the   key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the 
screen.
Press the   key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the   and   keys to move the edit cursor
To validate the value, press the   key for 3 seconds; the prog icon will stop flashing.
Press the   key to return to the initial gateway screen.
To access the following communications screen press the key  .
5.5.5. ETHERNET COMMUNICATIONS: MAC ADDRESS
This screen shows the device’s MAC address.
    
Press the key   to display the value.
To access the following communications screen press the key  .
52
CVM-E3-MINI
Instruction Manual