Circutor CVM-E3-MINI - Profile

5.2.- e
3
PROFILE
The installation’s consumed and generated energy are displayed on the e
3
profile of the device.
The installation status is also displayed:
Installation is consuming energy.
Installation is generating energy.
Long press (3 sec.) the or keys to jump from the generated values to the consumed values
displayed.
The generation values are identified with the negative sign on the screen, which appears in front of
each parameter.
Note: If the 2 quadrant option has been configured, only the consumed values can be displayed.
This profile is identified with the e
3
symbol on the left of the screen.
Use keys and to browse the different screens (short keystroke).
Table 19: Screens of the e
3
profile.
Screen Parameters (units)
Total three-phase active Energy
(2) (3)
(kWh)
Total three-phase Apparent Energy
(2)(3)
(kVAh)
Total three-phase Inductive Reactive Energy
(2)(3)
(kvar
L
h)
Total three-phase Capacitive Reactive Energy
(2) (3)
(kvar
C
h)
45
Instruction Manual
CVM-E3-MINI