Circutor CVM-E3-MINI - 5�- Display; 5�1�- Analyzer Profile

5. DISPLAY
The CVM-E3-MINI has 2 operation profiles. The display screens will be opened for the corresponding
profile:
 Analyzer profile, analyzer,
 Electrical energy efficiency profile, e
3
,
By default, the device displays the electrical energy efficiency profile, e
3
, press the key to change
from one operating profile to another.
5.1.- ANALYZER PROFILE
The device displays 15 different screens for the analyzer profile (Table 18) and the voltage and
current harmonics, up to the 31st order harmonic, for each one of the lines, L1, L2 and L3. (“5.1.4.-
HARMONICS”).
Use keys and to browse the different screens.
The inst symbol on the left of the screen indicates that the values being displayed are of the
instantaneous type.
Table 18: Analyzer profile screens.
Screen Parameters (units)
phase-neutral Voltage L1 (V
ph-N
)
phase-neutral Voltage L2 (V
ph-N
)
phase-neutral Voltage L3 (V
ph-N
)
phase-phase Voltage L1-L2 (V
ph-ph
)
phase-neutral Voltage L2-L3 (V
ph-ph
)
phase-neutral Voltage L3-L1 (V
ph-ph
)
Medium phase-neutral Voltage
Medium phase-phase Voltage
Frequency (Hz)
40
CVM-E3-MINI
Instruction Manual