This screen is used to programme the carbon emissions ratio for consumed energy, using the 2 tariffs
configured for the device: T1 on the top line and T2 on the bottom line.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Press the key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the and keys to move the edit cursor.
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
If the value entered by the user is out of the range of programming values, the programmed value will
be deleted and the system will restore it to the last saved value.
Configuration values
Table 34: Configuration values: Carbon emissions ratio (Consumed energy).
Carbon emissions ratio (Consumed energy)
Minimum value 0
Maximum value
1.9999
Press key to access the next programming step.
6.15.- kgC0
2
CARBON EMISSION RATIO OF GENERATED ENERGY
The carbon emissions ratio is the amount of emissions released into the atmosphere to produce a unit
of electricity (1 kWh).
The ratio for the European mix is approximately 0.65 kgCO
2
per kWh.
This screen is used to programme the carbon emissions ratio for generated energy, using the 2 tariffs
configured for the device: T1 on the top line and T2 on the bottom line.
65
Instruction Manual
CVM-E3-MINI
To Next Page
Loading...
