Circutor CVM-E3-MINI - 6�22�6�- Bacnet PROTOCOL: BAUD RATE; 6�22�7�- Bacnet PROTOCOL

6.22.6.- BACnet PROTOCOL : BAUD RATE
The baud rate of BACnet communications is programmed on this screen.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Press key to browse the options.
 Configuration values
Table 58: Configuration values: BACnet protocol: baud rate
Baud rate
Possible values 9600 19200 38400
(6)
57600
(6)
115200
(6)
(6)
Available on devices with software version v2.xx.
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
Press key to access the next programming step.
6.22.7.- BACnet PROTOCOL : ID
The device ID is programmed on this screen.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Press the key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the and keys to move the edit cursor.
 Configuration values
Table 59: Configuration values: BACnet protocol: ID.
ID
Minimum value 0
Maximum value 99999
82
CVM-E3-MINI
Instruction Manual