Circutor CVM-E3-MINI - 6�11�- Deleting Maximum and Minimum Values; 6�12�- Deleting Energy Values

6.11.- DELETING MAXIMUM AND MINIMUM VALUES
On this screen you select whether or not to delete the maximum and minimum values
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Use the key to browse the available options.
 Configuration values
Table 31: Configuration values: Deleting Maximum and minimum.
Deleting maximum and minimum
Possible values Yes No
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
Select Yes to force the device to automatically delete all maximum and minimum values; the No option
will be displayed again on the screen.
Press key to access the next programming step.
6.12.- DELETING ENERGY VALUES
On this screen you select whether or not to delete the energy, cost, CO
2
emissions and No. of hours
values
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Use the key to browse the available options.
63
Instruction Manual
CVM-E3-MINI