Circutor CVM-E3-MINI - 5�5�3� Ethernet Communications: Ip Mask

Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Press the key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the and keys to move the edit cursor
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
Press the key to return to the initial IP address screen.
To access the following communications screen press the key .
5.5.3. ETHERNET COMMUNICATIONS: IP MASK
You can set up (DHCP disabled) or view the IP mask on this screen.
Press the key to display the value.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Press the key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the and keys to move the edit cursor
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
Press the key to return to the initial IP mask screen.
To access the following communications screen press the key .
51
Instruction Manual
CVM-E3-MINI