Circutor CVM-E3-MINI - CONFIGURATION

6. CONFIGURATION
To enter the configuration menu press the key for 3 seconds.
If the icon appears on the configuration screen, the configuration parameters can be edited.
If the icon appears, the configuration of the unit will be locked with a password (“6.23.- LOCKING
THE PROGRAMMING”; when the user tries to edit the value using the , key, the screen in Figure 31
ill be displayed, in which the user must enter the password to unlock.
Figure 31: Password screen.
Press the key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the and keys to move the edit cursor.
To validate the password, press the key if you are on the last digit or the key if you are on the
first digit.
Default password: 1234.
The configuration parameters can be modified after entering the correct password.
55
Instruction Manual
CVM-E3-MINI