Circutor CVM-E3-MINI - 6�13�- Enable Harmonics Display Screen; Carbon Emission Ratio of Consumed Energy

 Configuration values
Table 32: Configuration values: Deleting Energy.
Deleting Energy
Possible values Yes No
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
Select Yes to force the device to automatically delete all values; the No option will be displayed again
on the screen.
Press key to access the next programming step.
6.13.- ENABLE HARMONICS DISPLAY SCREEN.
This screen is used to select whether harmonics are displayed or not.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Use the key to browse the available options.
 Configuration values
Table 33: Configuration values: Harmonics display.
Harmonics display
Possible values Yes No
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
Press key to access the next programming step.
6.14.- kgC0
2
CARBON EMISSION RATIO OF CONSUMED ENERGY
The carbon emissions ratio is the amount of emissions released into the atmosphere to produce a unit
of electricity (1 kWh).
The ratio for the European mix is approximately 0.65 kgCO
2
per kWh.
64
CVM-E3-MINI
Instruction Manual