Circutor CVM-E3-MINI - 5�5�- ETHERNET - Wi-Fi - Bluetooth COMMUNICATIONS SCREENS; 5�5�1� Ethernet COMMUNICATIONS: Dhcp CONFIGURATION; 5�5�2� Ethernet Communications: Ip Adress

5.5.- ETHERNET - Wi-Fi - Bluetooth
®
COMMUNICATIONS SCREENS
(Models CVM-E3-MINI-xxx-WiEth)
Note: “ANNEX A  CONFIGURATION MENUS” shows the full settings tree structure.
Press the keys simultaneously from any display screen to show the settings and display
screens for Ethernet, Wi-Fi and Bluetooth
®
communications.
5.5.1. ETHERNET COMMUNICATIONS: DHCP CONFIGURATION
You can enable or disable DHCP on this screen. If DHCP is enabled (default configuration), the IP
address is assigned dynamically via a central server. No other parameters need to be set up.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
The key is used to browse the different options:
 Configuration values
Table 20:Configuration values: DHCP Configuration.
DHCP Configuration
Possible values
no
DHCP is not enabled.
YES
DHCP is enabled
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
Press key to access the next programming step.
5.5.2. ETHERNET COMMUNICATIONS: IP ADRESS
You can set up (DHCP disabled) or view the IP address on this screen.
Press the key to display the value.
50
CVM-E3-MINI
Instruction Manual