Circutor CVM-E3-MINI - 6�22�8�- Bacnet PROTOCOL: MAC ADDRESS

To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
If the value entered by the user is out of the range of programming values, the programmed value will
be deleted and the system will restore it to the last saved value.
Press key to access the next programming step.
6.22.8.- BACnet PROTOCOL : MAC ADDRESS
The MAC address is programmed on this screen.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Press the key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the and keys to move the edit cursor.
 Configuration values
Table 60: Configuration values: BACnet protocol: MAC address.
MAC address
Minimum value 0
Maximum value 127
To validate the value, press the key for 3 seconds; the prog icon will stop flashing.
If the value entered by the user is out of the range of programming values, the programmed value will
be deleted and the system will restore it to the last saved value.
Press key to access the next programming step.
83
Instruction Manual
CVM-E3-MINI