Cisco 7800 Series

Description and More InformationFeature
Enables users to park a call by pressing only one button using the Direct Park feature.
Administrators must configure a Busy Lamp Field (BLF) Assisted Directed Call Park button.
When users press an idle BLF Assisted Directed Call Park button for an active call, the active
call is parked at the Direct Park slot associated with the Assisted Directed Call Park button.
See the call park information in the documentation for your particular Cisco Unified
Communications Manager release.
Assisted Directed Call Park
A stutter tone from the handset, headset, or speakerphone indicates that a user has one or
more new voice messages on a line.
The stutter tone is line-specific. You hear it only when using the line with the waiting
messages.
Note
Audible Message Waiting Indicator
(AMWI)
Connects incoming calls automatically after a ring or two.
Auto Answer works with either the speakerphone or the headset.
The Cisco IP Phone 7811 does not support a
headset.
Note
See directory number information in the documentation for your particular Cisco Unified
Communications Manager release.
Auto Answer
Enables the phone to synchronize the PC and SW ports to the same speed and to duplex. Only
ports configured for auto negotiate change speeds.
See Automatic Port Synchronization, Product Specific Configuration, on page 131.
Automatic Port Synchronization
Allows a user to use one-touch pickup functionality for call pickup features.
See call pickup information in the documentation for your particular Cisco Unified
Communications Manager release.
Auto Pickup
Enables a user to barge into a call by establishing the three-way conference call using the
built-in conference bridge of the target phone.
See “cBarge” in this table.
Barge
Prevents users from transferring an external call to another external number.
See call transfer restrictions in the documentation for your particular Cisco Unified
Communications Manager release.
Block External to External Transfer
Allows a user to monitor the call state of a directory number associated with a speed-dial
button on the phone.
The Cisco IP Phone 7811 does not support the
feature.
Note
See presence information in the documentation for your particular Cisco Unified
Communications Manager release.
Busy Lamp Field (BLF)
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
113
Telephony Features for the Cisco IP Phone