Procedure
Step 1
Press Applications .
Step 2
Select Admin Settings > Security Setup.
Step 3
To exit, press Back .
Security Setup Fields
The Security Setup screen displays these items.
Table 22: Security Setup items
DescriptionItem
Displays the security mode that is set for the phone.Security Mode
Indicates whether a locally significant certificate (used for the security features)
is installed on the phone or is not installed on the phone.
LSC
The Trust List is a top-level menu that provides submenus for the CTL Signature
and Call manager/TFTP Server.
Trust List
Allows you to enable 802.1X authentication for the phone.802.1x Authentication
Cisco IP Phone Web Page
Each Cisco IP Phone has a web page from which you can view a variety of information about the phone,
including:
•
Device Information: Displays device settings and related information for the phone.
•
Network Setup: Displays network setup information and information about other phone settings.
•
Network Statistics: Displays hyperlinks that provide information about network traffic.
•
Device Logs: Displays hyperlinks that provide information that you can use for troubleshooting.
•
Streaming Statistic: Displays hyperlinks to a variety of streaming statistics.
This section describes the information that you can obtain from the phone web page. You can use this
information to remotely monitor the operation of a phone and to assist with troubleshooting.
You can also obtain much of this information directly from a phone.
Access Web Page for Phone
To access the web page for a Cisco IP Phone, follow these steps:
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
187
Cisco IP Phone Web Page
To Next Page
Loading...
Need help?
General
