Hold/Resume Place an active call on hold and resume
the held call.
Conference Create a conference call.
Transfer Transfer a call.
Hold/Resume, Conference, and
Transfer
5
Speakerphone Toggle the speakerphone on or off.
When the speakerphone is on, the button is lit.
Mute Toggle the microphone on or off. When the
microphone is muted, the button is lit.
Headset Toggle the headset on or off. When the
headset is on, the button is lit.
The Cisco IP Phone 7811 does not have a Headset button.
Speakerphone, Mute, and Headset6
Contacts Access personal and corporate directories.
Applications Access call history, user preferences,
phone settings, and phone model information.
Messages Autodial your voice messaging system.
Contacts, Applications, and
Messages
7
Adjust the handset, headset, and speakerphone volume
(off hook) and the ringer volume(on hook).
Volume button8
Softkey, Line, and Feature Buttons
You can interact with the features on your phone in several ways:
•
Softkeys, located below the screen, give you access to the function displayed on the screen above the
softkey. The softkeys change depending on what you are doing at the time. The More ... softkey shows
you that more functions are available.
•
Feature and line buttons, located on either side of the screen, give you access to phone features and
phone lines.
◦ Feature buttons—Used to view calls on a line or access features such as Speed Dial.
◦ Line buttons—Used to answer a call or resume a held call. When not used for an active call, used
to initiate phone functions, such as the missed calls display.
Feature and line buttons illuminate to indicate status:
•
Green, steady—Active call or two-way intercom call
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
24
Buttons and Hardware
To Next Page
Loading...
Need help?
General
