Set Up Phone Features for a Single Phone
Procedure
Step 1
Sign into Cisco Unified Communications Manager Administration as an administrator.
Step 2
Select Device > Phone
Step 3
Locate the phone associated with the user.
Step 4
Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5
Check the Override Common Settings check box for any changed fields.
Step 6
Click Save.
Step 7
Click Apply Config.
Step 8
Restart the phone.
Product Specific Configuration
The following table describes the fields in the Product Specific Configuration Layout pane.
Table 15: Product Specific Configuration Fields
Description and Usage GuidelinesDefaultField Type
or Choices
Field Name
Turns off the speakerphone capability of the phone.UncheckedCheckboxDisable Speakerphone
Turns off the speakerphone and headset capability of the phone.UncheckedCheckboxDisable Speakerphone
and Headset
Controls the ability to use the PC port to connect a computer
into the LAN.
EnabledDisabled
Enabled
PC Port
Enables, disables, or restricts access to local phone
configuration settings in the Settings app.
• Disabled—The Settings menu does not display any
options.
• Enabled—All entries in the Settings menu are accessible.
• Restricted—Only the Phone settings menu is accessible.
EnabledDisabled
Enabled
Restricted
Settings Access
Enables or disables the ability for the phone to learn MAC
addresses from Gratuitous ARP. This capability is required to
monitor or record voice streams.
DisabledDisabled
Enabled
Gratuitous ARP
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
131
Phone Feature Configuration
To Next Page
Loading...
Need help?
General
