Description and Usage GuidelinesDefaultField Type
or Choices
Field Name
Allows you to configure the speed and duplex function of the
phone PC port remotely. This enhances the performance for
large deployments with specific port settings.
If the ports are configured for Remote Port Configuration in
Cisco Unified Communications Manager, the data cannot be
changed on the phone.
DisabledDisabled
Enabled
PC Port Remote
Configuration
Controls the access to the SSH daemon through port 22.
Leaving port 22 open leaves the phone vulnerable to Denial
of Service (DoS) attacks.
DisabledDisabled
Enabled
SSH Access
Gives the time, in seconds, that the toast displays. The time
includes the fade-in and fade-out times for the window.
5Integer 3, 4, 5, 6, 7, 8,
9, 10, 15, 30, 60
seconds
Incoming Call Toast
Timer
Controls the ability for a user to join a nonprivate call on a
shared phone line.
• cBarge—Enables a user to add another person to a call.
The call automatically converts to a conference, allowing
the user and other parties to access conference features.
• Turn on Softkey—Enables a user to conference into a
call on a shared line using cBarge.
• Barge—Enables a user to add another user to a call but
does not convert the call into a conference.
• Off—Disables barge. A new call initiates when the user
presses the line key.
cBargecBarge
Turn on Softkey
Barge
Off
Line Key Barge
Controls the ringing pattern.DefaultDefault
Japan
Ring Locale
Controls the ability to resume a TLS session without repeating
the entire TLS authentication process. If the field is set to 0,
then the TLS session resumption is disabled.
3600
Integer 0–3600
seconds
TLS Resumption
Timer
Enables or disables the Federal Information Processing
Standards (FIPS) mode on the phone.
DisabledDisabled
Enabled
FIPS Mode
Controls the text for the Hold softkey.
• HOLD/RESUME Key—The softkey displays
Hold/Resume.
• HOLD Key—The softkey displays Hold.
HOLD/RESUME
Key
HOLD/RESUME Key
HOLD Key
HOLD/RESUME
Key
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
139
Phone Feature Configuration
To Next Page
Loading...
Need help?
General
