If you cannot access the web page, it may be disabled by default.Note
Procedure
Step 1
Obtain the IP address of the Cisco IP Phone by using one of these methods:
a) Search for the phone in Cisco Unified Communications Manager Administration by choosing Device >
Phone. Phones that register with Cisco Unified Communications Manager display the IP address on the
Find and List Phones window and at the top of the Phone Configuration window.
b)
On the Cisco IP Phone, press Applications .
c) Select Admin Settings > Network Setup > IPv4 Setup, and then scroll to the IP Address field.
Step 2
Open a web browser and enter the following URL, where IP_address is the IP address of the Cisco IP Phone:
http://<IP_address>
Device Information
The Device Information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
Some of the items in the following table do not apply to all phone models.Note
To display the Device Information area, access the web page for the phone, and then click the Device
Information hyperlink.
Table 23: Device Information Area Items
DescriptionItem
The service mode for the phone.Service mode
The domain for the service.Service domain
The current state of the service.Service state
Media Access Control (MAC) address of the phone.MAC Address
Unique, fixed name that is automatically assigned to the phone based on the
MAC address.
Host Name
Directory number that is assigned to the phone.Phone DN
Identifies the application load version.App Load ID
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
188
Cisco IP Phone Web Page
To Next Page
Loading...
Need help?
General
