Cisco 7800 Series

DescriptionItem
Indicates the boot load version.Boot Load ID
Identifier of the firmware that is running on the phone.Version
Revision value of the phone hardware.Hardware Revision
Unique serial number of the phone.Serial Number
Model number of the phone.Model Number
Indicates whether is a voice message is waiting on the primary line for this phone.Message Waiting
Displays the following Cisco Unique Device Identifier (UDI) information about
the phone:
•
Device Type: Indicates hardware type. For example, phone displays for
all phone models.
•
Device Description: Displays the name of the phone associated with the
indicated model type.
•
Product Identifier: Specifies the phone model.
•
Serial Number: Displays the unique serial number of the phone.
UDI
Time for the Date/Time Group to which the phone belongs. This information
comes from Cisco Unified Communications Manager.
Time
Time zone for the Date/Time Group to which the phone belongs. This information
comes from Cisco Unified Communications Manager.
Time Zone
Date for the Date/Time Group to which the phone belongs. This information
comes from Cisco Unified Communications Manager.
Date
Amount of available system memory.System Free Memory
Amount of free memory for the Java heap.Java Heap Free Memory
Amount of free memory for the Java pool.Java Pool Free Memory
Indicates if the Federal Information processing Standard (FIPS) Mode is enabled.FIPS Mode Enabled
Network Setup
The Network Setup area on a phone web page displays network setup information and information about
other phone settings. The following table describes these items.
You can view and set many of these items from the Network Setup menu on the Cisco IP Phone.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
189
Cisco IP Phone Web Page