Cisco 7800 Series Administrator's Guide

Of the two button types and softkeys, only programmable feature buttons require configuration in Cisco IP
Phone administration.
The Cisco IP Phone 7811 does not have programmable feature buttons.Note
For information about configuring programmable feature buttons, see Phone Button Templates, on page 163.
Table 14: Features with Corresponding Buttons and Softkeys
SoftkeyProgrammable Feature
Button
Dedicated Feature
Button
Feature Name
XXAnswer
XBarge
XXCall Back
XXCall Forward All
XXCall Park
XCall Park Line Status
XXCall Pickup (Pick Up)
XCall Pickup Line Status
X (only displayed during
connected call conference
scenario)
XConference
XDivert
XXDo Not Disturb
XXGroup Pickup (Group Pick
Up)
XXHold
XXHunt Groups
XIntercom
XXMalicious Call Identification
(MCID)
XXMeet Me
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
128
Feature Buttons and Softkeys

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)