Cisco 7800 Series Administrator's Guide

CHAPTER 1
New and Changed Information
•
New Information for Firmware Release 11.7(1), page 1
•
New Information for Firmware Release 11.5(1)SR1, page 1
•
New Information for Firmware Release 11.5(1), page 2
•
New Information for Firmware Release 11.0, page 2
New Information for Firmware Release 11.7(1)
No administration updates were required for firmware release 11.7(1).
New Information for Firmware Release 11.5(1)SR1
All new features have been added to Telephony Features for the Cisco IP Phone, on page 112.
All references into Cisco Unified Communications Manager documentation have been updated to support all
Cisco Unified Communications Manager releases.
Table 1: Cisco IP Phone 7800 Administration Guide Revisions for Firmware Release 11.5(1)SR1
Updated SectionRevision
New presentation of phone feature configuration in
Cisco Unified Communications Manager Phone
Feature Configuration, on page 129
General
Product Specific Configuration, on page 131Updated for Configurable Ringer support
Set up AS-SIP, on page 147Updated for Do not disturb with MLPP support
Security Enhancements for Your Phone Network, on
page 96
Enhanced Security
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
1

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)