Cisco 7800 Series

Description and More InformationFeature
Allows you to view shared line activity in the phone Call History. This feature will:
•
Log missed calls for a shared line
•
Log all answered and placed calls for a shared line
See Call History Shared Line, Product Specific Configuration, on page 131.
Call History for Shared Line
Allows users to park (temporarily store) a call and then retrieve the call by using another
phone in the Cisco Unified Communications Manager system.
Call Park
Allows users to redirect a call that is ringing on another phone within their pickup group to
their phone.
You can configure an audio and visual alert for the primary line on the phone. This alert
notifies the users that a call is ringing in their pickup group.
Call Pickup
Allows a supervisor to record an active call. The user might hear a recording audible alert
tone during a call when it is being recorded.
When a call is secured, the security status of the call is displayed as a lock icon on Cisco IP
Phones. The connected parties might also hear an audible alert tone that indicates the call is
secured and is being recorded.
When an active call is being monitored or recorded, the user can receive or place
intercom calls; however, if the user places an intercom call, the active call is put on
hold, which causes the recording session to terminate and the monitoring session to
suspend. To resume the monitoring session, the party whose call is being monitored
must resume the call.
Note
Call Recording
Indicates (and allows users to answer) an incoming call that rings while on another call.
Incoming call information appears on the phone display.
See directory number information in the documentation for your particular Cisco Unified
Communications Manager release.
Call Waiting
Provides Call Waiting users with the option of an audible ring instead of the standard beep.
Options are Ring, Ring Once, Flash Only, and Beep Only.
See directory number information in the documentation for your particular Cisco Unified
Communications Manager release.
Call Waiting Ring
Caller identification such as a phone number, name, or other descriptive text appear on the
phone display.
See routing, call display, and directory number information in the documentation for your
particular Cisco Unified Communications Manager release.
Caller ID
Allows a user to block their phone number or name from phones that have caller identification
enabled.
See routing and directory number information in the documentation for your particular Cisco
Unified Communications Manager release.
Caller ID Blocking
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
115
Telephony Features for the Cisco IP Phone