Cisco 7800 Series

Non-Lockable Wall Mount Components for 7811
The following figure shows the components of the Cisco IP Phone 7811 Wall Mount Kit.
Figure 2: Wall Mount Kit Components for 7811
The package includes these items:
•
One phone bracket
•
One wall bracket
•
Four M4 x 25-mm Phillips-head screws with four anchors
•
Two M3 x 7-mm Self-tapping screws
•
One 200-mm Ethernet cable
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
64
Non-Lockable Wall Mount Components for 7811