Cisco 7906G Administration Guide

CHAPTER
5-1
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
5
Configuring Features, Templates,
Services, and Users
After you install Cisco Unified IP Phones in your network, configure their
network settings, and add them to Cisco
Unified CallManager, you must use the
Cisco
Unified CallManager Administration application to configure telephony
features, optionally modify phone templates, set up services, and assign users.
This chapter provides an overview of these configuration and setup procedures.
Cisco
Unified CallManager documentation provides detailed instructions for
these procedures.
For suggestions about how to provide users with information about features, and
what information to provide, see
Appendix A, “Providing Information to Users.”
For information about setting up phones in non-English environments, see
Appendix C, “Supporting International Users.”
This chapter includes following topics:
• Telephony Features Available for the Phone, page 5-2
• Configuring Corporate and Personal Directories, page 5-11
• Modifying Phone Button Templates, page 5-12
• Configuring Softkey Templates, page 5-13
• Setting Up Services, page 5-13
• Adding Users to Cisco Unified CallManager, page 5-14
• Managing the User Options Web Pages, page 5-15

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English