A-3
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Appendix A Providing Information to Users
How Users Access a Voice Messaging System
Make sure to provide end users with the following information about the User
Options web pages:
• The URL required to access the application. This URL is:
http://server_name/CCMUser/, where server_name is the host on which the
web server is installed.
• A user ID and PIN needed to access the application.
These settings correspond to the values you entered when you added the user
to Cisco
Unified CallManager (see the “Adding Users to
Cisco Unified CallManager” section on page 5-14).
• A brief description of what a web-based, graphical user interface application
is, and how to access it with a web browser.
• An overview the tasks that users can accomplish using the web page.
You can also refer users to Customizing Your Cisco Unified IP Phone on the Web,
which is available at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
How Users Access a Voice Messaging System
Cisco Unified CallManager lets you integrate with many different voice mail
messaging systems, including the Cisco Unity voice messaging system. Because
you can integrate with a variety of systems, you must provide users with
information about how to use your specific system.
You should provide this information to each user:
• How to access the voice mail messaging system account.
Make sure that you have used Cisco Unified CallManager to configure the
Messages menu or the Msgs softkey.
• Initial password for accessing the voice messaging system.
Make sure that you have configured a default voice messaging system
password for all users.
• How the phone indicates that voice messages are waiting.
Make sure that you have used Cisco Unified CallManager to set up a message
waiting indicator (MWI) method.
To Next Page
Loading...
Need help?
General
