Cisco 7906G Administration Guide

4-7
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Unlocking and Locking Options, page 4-4
• Editing the Values of an Option Setting, page 4-5
• Network Configuration Menu, page 4-7
• Device Configuration Menu, page 4-15
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a
variety of network settings.
Table 4-2 describes these options and, where
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
“Displaying a Configuration Menu” section on page 4-2.
Before you can change an option on this menu, you must unlock options as
described in the
“Unlocking and Locking Options” section on page 4-4. The Edit,
Yes , or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the “Editing the
Values of an Option Setting” section on page 4-5.
Ta b l e 4-2 Network Configuration Menu Options
Option Description To Change
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP)
server from which the phone
obtains its IP address.
Display only—cannot configure.
BOOTP Server Indicates whether the phone
obtains its configuration from a
Bootstrap Protocol (BootP) server
instead of from a DHCP server.
Display only—cannot configure.
MAC Address Unique Media Access Control
(MAC) address of the phone.
Display only—cannot configure.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English