1-23
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding the Requirements for Configuring and Installing Cisco Unified IP Phones
Configuring Cisco Unified IP Phones in
Cisco
Unified CallManager
To add phones to the Cisco Unified CallManager database, you can use:
• Auto-registration
• Cisco Unified CallManager Administration
• Bulk Administration Tool (BAT)
• BAT and the Tool for Auto-Registered Phones Support (TAPS)
For more information about these choices, see the “Adding Phones to the
Cisco Unified CallManager Database” section on page 2-12.
For general information about configuring phones in Cisco Unified CallManager,
refer to the “Cisco
Unified IP Phone” chapter in the Cisco Unified CallManager
System Guide and to the “Configuring Cisco IP Phone chapter” in the
Cisco
Unified CallManager Administration Guide.