CHAPTER
3-1
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
3
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the
Cisco
Unified IP Phone 7906G and 7911G on an IP telephony network:
• Before You Begin, page 3-2
• Understanding the Cisco Unified IP Phone 7906G and 7911G Components,
page 3-5
• Installing the Cisco Unified IP Phone, page 3-10
• Mounting the Phone to a Wall, page 3-15
• Verifying the Phone Startup Process, page 3-16
• Configuring Startup Network Settings, page 3-16
• Configuring Security on the Cisco Unified IP Phone, page 3-17
Note Before you install a Cisco Unified IP Phone, you must decide how to configure
the phone in your network. Then you can install the phone and verify its
functionality. For more information, see
Chapter 2, “Preparing to Install the
Cisco Unified IP Phone on Your Network.”