Cisco 7906G Administration Guide

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-28
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-15
Line Settings Menu
The Line Settings menu displays information that relate to the configurable
parameters for each of the lines on your SIP phone.
Table 4-15 describes the
options in this menu.
Backup Proxy Port Displays the port number of the backup
proxy server or gateway.
Display only—cannot configure.
Emergency Proxy Displays the IP address of the emergency
proxy server or gateway.
Display only—cannot configure.
Emergency Proxy Port Displays the port number of the
emergency proxy server or gateway.
Display only—cannot configure.
Outbound Proxy Displays the IP address of the outbound
proxy server.
Display only—cannot configure.
Outbound Proxy Port Displays the port number of the
outbound proxy server.
Display only—cannot configure.
NAT Enabled Displays if Network Address Translation
(NAT) is enabled.
Display only—cannot configure.
NAT Address Displays the WAN IP address of the NAT
or firewall server.
Display only—cannot configure.
Call Statistics Displays if call statistics are enabled on
the phone.
Use Cisco Unified CallManager
Administration > Device > Device
Settings > SIP Profile.
Table 4-14 SIP General Configuration Menu Options (continued)
Option Description To Change

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English