Cisco 7906G Administration Guide

Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding the Requirements for Configuring and Installing Cisco Unified IP Phones
1-24
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Checklist for Configuring the Cisco Unified IP Phone 7906G and 7911G in
Cisco
Unified CallManager
Table 1-4 provides an overview and checklist of configuration tasks for the
Cisco Unified IP Phone 7906G and 7911G in Cisco Unified CallManager
Administration. The list presents a suggested order to guide you through the
phone configuration process. Some tasks are optional, depending on your system
and user needs. For detailed procedures and information, refer to the sources in
the list.
Ta b l e 1-4 Checklist for Configuring the Cisco Unified IP Phone 7906G and 7911G Series in
Cisco Unified CallManager
Task Purpose For More Information
1. Gather the following information
about the phone:
– Phone Model
– MAC address
– Physical location of the phone
– Name or user ID of phone user
– Device pool
– Calling search space and
location information (if used)
– Number of lines, associated
directory numbers (DNs), and
partitions to assign to the
phone
– Cisco Unified CallManager
user to associate with the
phone
– Phone usage information that
affects phone button template,
softkey template, phone
features, IP Phone services, or
phone applications
Provides list of
configuration requirements
for setting up phones.
Identifies preliminary
configuration that you need
to perform before
configuring individual
phones, such as phone
button templates or softkey
templates.
Refer to the
Cisco
Unified CallManager
System Guide,
Cisco Unified IP Phone
chapter.
See the “Telephony Features
Available for the Phone”
section on page 5-2.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English