Cisco 7906G Administration Guide

4-21
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
NTP Configuration Menu
The NTP Configuration menu displays information about NTP server and mode
configuration used by the phone.
Table 4-9 describes the options on this menu.
Ethernet Configuration Menu
The Ethernet Configuration menu displays whether the headset, speakerphone,
and video capability are enabled on the phone.
Table 4-10 describes the options
on this menu.
Ta b l e 4-8 Media Configuration Menu Options
Option Description To Change
Speaker Enabled Indicates whether the speakerphone is
enabled on the phone.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Ta b l e 4-9 NTP Configuration Menu Options
Option Description To Change
NTP Server 1 The IP address of the primary NTP
server.
Use Cisco Unified CallManager
Administration to modify.
NTP Server 2 The IP address of the secondary or
backup NTP server.
Use Cisco Unified CallManager
Administration to modify.
NTP Mode 1 The primary server mode. Supported
modes are Directed Broadcast and
Unicast.
Use Cisco Unified CallManager
Administration to modify.
NTP Mode 2 The secondary server mode. Supported
modes are Directed Broadcast and
Unicast.
Use Cisco Unified CallManager
Administration to modify.
DST Auto Adjust Indicates whether automatic
adjustment for daylight savings time is
enabled on the phone.
Use Cisco Unified CallManager
Administration to modify.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English