Cisco 7906G Administration Guide

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
4-36
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
802.1X Authentication and Status
Use the options that are described in the following tables to enable 802.1X
authentication and monitor its progress:
• Table 4-21 on page 4-37—802.1X Authentication Settings
• Table 4-22 on page 4-38—802.1X Authentication Real-Time Status
Ta b l e 4-20 Trust List Information
Option Description To Change
CAPF Server IP address of the CAPF used by the
phone. Also displays a certificate
icon if a certificate is installed for
this server.
For more information about these
settings, refer to the “Configuring the
Cisco CTL Client” section in Cisco
Unified CallManager Security Guide.
CallManager /
TFPT Server
IP address of a
Cisco
Unified CallManager and TFTP
server used by the phone. Also displays
a certificate
icon if a certificate is
installed for this server.
For more information about these
settings, refer to the “Configuring the
Cisco CTL Client” section in Cisco
Unified CallManager Security Guide.
SRST Router IP address of the trusted SRST router
that is available to the phone, if such a
device has been configured in
Cisco
Unified CallManager
Administration. Also displays a
certificate
icon if a certificate is
installed for this server.
For more information about these
settings, refer to the “Configuring the
Cisco CTL Client” section in Cisco
Unified CallManager Security Guide.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English