Cisco 7906G Administration Guide

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Model Information Screen
7-2
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Model Information Screen
The Model Information screen displays specific information about the IP phone.
To display the Model Information screen, press the Menu button and then select
select Settings > Model Information.
To exit the Model Information screen, press the Exit softkey.
Table 7-1 describes the options in the Model Information screen.
Ta b l e 7-1 Model Information
Option Description To Change
Model Number Model number of the phone Display only—Cannot configure
MAC Address MAC address of the phone Display only—Cannot configure
Load File Identifier of the factory-installed load
running on the phone
Display only—Cannot configure
Boot Load ID Identifier of the factory-installed load
running on the phone
Display only—Cannot configure
Serial Number Serial number of the phone Display only—Cannot configure
CTL Displays the MD5 hash of the
certificate trust list (CTL) file that is
installed in the phone. If no CTL file is
installed on the phone, this field
displays No. (If security is configured
for the phone, the CTL file installs
automatically when the phone reboots
or resets. For more information about
this file, refer to
Cisco
Unified CallManager Security
Guide.)
For more information about this file, refer
to Cisco Unified CallManager Security
Guide.
MIC Indicates whether a manufacturing
installed certificate (used for the
security features) is installed on the
phone (Yes) or is not installed on the
phone (No).
For information about how to manage the
MIC for a phone, refer to the “Using the
Certificate Authority Proxy Function”
section in Cisco Unified CallManager
Security Guide.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English