Cisco 7906G Administration Guide

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Adding Phones to the Cisco Unified CallManager Database
2-12
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Adding Phones to the Cisco Unified CallManager
Database
Before installing the Cisco Unified IP phone, you must choose a method for
adding phones to the Cisco
Unified CallManager database. These sections
describe the methods:
• Adding Phones with Auto-Registration, page 2-13
• Adding Phones with Auto-Registration and TAPS, page 2-14
• Adding Phones with Cisco Unified CallManager Administration, page 2-15
• Adding Phones with BAT, page 2-16
Table 2-4 provides an overview of these methods for adding phones to the
Cisco Unified CallManager database.
Ta b l e 2-4 Methods for Adding Phones to the Cisco Unified CallManager
Database
Method
Requires MAC
Address?
Notes
Auto-registration No Provides no control over directory
number assignment to phone.
Not available when security or
encryption is enabled.
Auto-registration
with TAPS
No Requires auto-registration and the Bulk
Administration Tool (BAT); updates the
Cisco
Unified CallManager database
with the MAC address and DNs for the
device when user calls TAPS from the
phone.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English