Cisco 7906G Administration Guide

1-11
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Chapter 1 An Overview of the Cisco Unified IP Phone
What Features are Supported on the Cisco Unified IP Phone 7906G and 7911G?
Configuring Network Parameters Using the
Cisco
Unified IP Phone
You can configure parameters such as DHCP, TFTP, and IP settings on the phone
itself. You can also obtain statistics about a current call or firmware versions on
the phone.
For more information about configuring features and viewing statistics from the
phone, see
Chapter 4, “Configuring Settings on the Cisco Unified IP Phone” and
see Chapter 7, “Viewing Model Information, Status, and Statistics on the
Cisco Unified IP Phone”
Providing Users with Feature Information
If you are a system administrator, you are likely the primary source of information
for Cisco Unified IP Phone users in your network or company. To ensure that you
distribute the most current feature and procedural information, familiarize
yourself with Cisco Unified IP Phone documentation. Make sure to visit the
Cisco
Unified IP Phone web site:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/ip_clmgr/engl
ish/index.htm.
From this site, you can view and order various user guides, including wallet cards.
For complete ordering information, see the
“Obtaining Documentation” section
on page Boilerplate 1.
In addition to providing users with documentation, it is important to inform them
of available Cisco Unified IP Phone features—including features specific to your
company or network—and of how to access and customize those features, if
appropriate.
For a summary of some of the key information that phone users need their system
administrators to provide, see
Appendix A, “Providing Information to Users,”

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English