Cisco 7906G Administration Guide

13
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Preface
Overview
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1
(SIP), Cisco
Unified IP Phone 7906G and 7911G provides the information you
need to understand, install, configure, manage, and troubleshoot the
Cisco
Unified IP Phone 7906G and 7911G on a Voice-over-IP (VoIP) network.
Because of the complexity of an IP telephony network, this guide does not provide
complete and detailed information for procedures that you need to perform in
Cisco Unified CallManager or other network devices. See the
“Related
Documentation” section on page 15 for a list of related documentation.
Audience
Network engineers, system administrators, or telecom engineers should review
this guide to learn the steps required to properly set up the
Cisco
Unified IP Phone 7906G and 7911G on the network.
The tasks described are administration-level tasks and are not intended for
end-users of the phones. Many of the tasks involve configuring network settings
and affect the phone ability to function in the network.
Because of the close interaction between the Cisco Unified IP Phone and
Cisco
Unified CallManager, many of the tasks in this manual require familiarity
with Cisco
Unified CallManager.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English