Cisco 7906G Administration Guide

4-15
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Device Configuration Menu
The Device Configuration menu provides access to submenus from which you can
view a variety of settings that are specified in the configuration file for a phone.
(The phone downloads the configuration file from the TFTP server.) These
sub-menus are:
• CallManager Configuration Menu, page 4-15
• HTTP Configuration Menu, page 4-17
• Locale Configuration Menu, page 4-18
• UI Configuration Menu, page 4-19
• Media Configuration Menu, page 4-20
• NTP Configuration Menu, page 4-21
• Ethernet Configuration Menu, page 4-21
• Security Configuration Menu, page 4-22
• QoS Configuration Menu, page 4-24
• Network Configuration Menu, page 4-25
• SIP Configuration Menu, page 4-26
• Call Preferences Menu, page 4-29
• Dynamic Network Configuration Menu, page 4-31
For instructions about how to access the Device Configuration menu and its
sub-menus, see the
“Displaying a Configuration Menu” section on page 4-2.
CallManager Configuration Menu
The CallManager Configuration menu contains the options CallManager 1,
CallManager 2, CallManager 3, CallManager 4, and CallManager 5. These
options show Cisco
Unified CallManager servers that are available for processing
calls from the phone, in prioritized order.
To change these options, use Cisco Unified CallManager Administration.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English