Cisco 7906G

1-25
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding the Requirements for Configuring and Installing Cisco Unified IP Phones
2. Customize phone button templates
(if required).
Adds Privacy feature to meet
user needs.
Refer to the Cisco Unified
CallManager Administration
Guide,
Phone Button Template
Configuration chapter.
See the“Modifying Phone
Button Templates” section on
page 5-12.
3. Add and configure the phone by
completing these required fields in the
Phone Configuration window:
– Phone type
– Description (user name or ID)
– MAC address
– Device pool
– Partition
– Calling Search Space
– Button template
– Product Specific
Configuration
– Softkey template
(if
customized)
Adds the device with its
default settings to the
Cisco
Unified CallManager
database.
Refer to the Cisco Unified
CallManager Administration
Guide,
Cisco
Unified IP Phone
Configuration chapter.
Table 1-4 Checklist for Configuring the Cisco Unified IP Phone 7906G and 7911G Series in
Cisco Unified CallManager (continued)
Task Purpose For More Information