Cisco 7906G Administration Guide

Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding the Requirements for Configuring and Installing Cisco Unified IP Phones
1-26
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
4. Add and configure the directory
number on the phone by completing
these required fields in the Directory
Number Configuration window.
– Directory number
– Partition
– Multiple Calls and Call
Waiting
– Call Forwarding and Pickup (if
used)
– Voice Messaging (if used)
Adds primary and secondary
directory numbers and
features associated with
directory numbers to the
phone.
Refer to the Cisco Unified
CallManager Administration
Guide: Adding a Directory
Number chapter, and
Cisco
Unified IP Phone
Configuration chapter,
“Creating a Cisco Unity Voice
Mailbox” section.
See the “Telephony Features
Available for the Phone”
section on page 5-2.
5. Customize softkey templates
(optional).
Adds, deletes, or changes
order of softkey features that
display on the user’s phone
to meet feature usage needs.
Refer to the Cisco Unified
CallManager Administration
Guide, Softkey Template
Configuration chapter.
See the “Configuring Softkey
Templates” section on
page 5-13.
6. Assign speed-dial numbers
(optional).
Adds speed-dial numbers,
Note Users can change
speed-dial settings
on their phones by
using
Cisco
Unified IP
Phone User Options.
Refer to the Cisco Unified
CallManager Administration
Guide,
Cisco
Unified IP Phone
Configuration chapter.
Table 1-4 Checklist for Configuring the Cisco Unified IP Phone 7906G and 7911G Series in
Cisco Unified CallManager (continued)
Task Purpose For More Information

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English