Cisco 7906G Administration Guide

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Device Information
8-4
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
To disable access to the web pages for a phone, follow these steps from
Cisco
Unified CallManager Administration:
Step 1 Choose Device > Phone.
Step 2 Specify the criteria to find the phone and click Find, or click Find to display a list
of all phones.
Step 3 Click the device name to open the Phone Configuration window for the device.
Step 4 From the Web Access drop-down list box, choose Disabled.
Step 5 Click Update.
Note Some features, such as Cisco Quality Report Tool, do not function
properly without access to the phone web pages. Disabling web access
also affects any serviceability application that relies on web access, such
as CiscoWorks.
To enable web page access when it is disabled, refer to the preceding steps about
disabling access. Follow these same steps, but choose Enabled in Step 4.
Device Information
The Device Information area on a phone web page displays device settings and
related information for the phone.
Table 8-1 describes these items.
To display the Device Information area, access the web page for the phone as
described in the
“Accessing the Web Page for a Phone” section on page 8-2, and
then click the Device Information hyperlink.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English