Cisco 8832 Administration Guide

3. If a specific user in the user group did need access to the phone web pages, you could enable it for that
particular user.
Related Topics
Configure User Credentials Persistent for Expressway Sign-In, on page 114
Set Up Phone Features for all Phones
Procedure
Step 1 Sign into Cisco Unified Communications Manager Administration as an administrator.
Step 2 Select Device > Device Settings > Common Phone Profile
Step 3 Locate the phones.
Step 4 Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5 Check the Override Enterprise Settings check box for any changed fields.
Step 6 Click Save.
Step 7 Click Apply Config.
Step 8 Restart the phones.
Related Topics
Product Specific Configuration, on page 93
Set Up Phone Features for a Group of Phones
Procedure
Step 1 Sign into Cisco Unified Communications Manager Administration as an administrator.
Step 2 Select Device > Device Settings > Common Phone Profile
Step 3 Locate the group of users.
Step 4 Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5 Check the Override Enterprise Settings check box for any changed fields.
Step 6 Click Save.
Step 7 Click Apply Config.
Step 8 Restart the phones.
Related Topics
Product Specific Configuration, on page 93
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
92
Cisco IP Conference Phone Administration
Set Up Phone Features for all Phones

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g